Foam applications number for nuclear decontamination purposes has recently increased. The major advantage of foam decontamination is the reduction of secondary liquid wastes volumes. Among foam applications, we focus on foam circulation in contaminated equipements. Dynamic properties of the system ensures an homogeneous and rapid effect of the foambed-drifted chemical reagents present in the liquid phase. This paper describes a new approach of foam decontamination for pipes. It is based on an alternated air and foam injections. We called it “string-foam circulation”. A further reduction of liquid wastes is achieved compared to continuous foam. Secondly, total pressure loss along the pipe is controlled by the total foam length in the pipe. It is thus possible to clean longer pipes keeping the pressure under atmospheric pressure value. This ensures the non dispersion of contamination. This study describes experimental results obtained with a neutral foam as well with an acid foam on a 130 m long loop. Finally, the decontamination of a 44 meters pipe is presented.
- Nuclear Engineering Division
Pipe Decontamination Involving “String-Foam Circulation”
- Views Icon Views
- Share Icon Share
- Search Site
Turchet, JP, Fournel, B, & Estienne, G. "Pipe Decontamination Involving “String-Foam Circulation”." Proceedings of the 10th International Conference on Nuclear Engineering. 10th International Conference on Nuclear Engineering, Volume 1. Arlington, Virginia, USA. April 14–18, 2002. pp. 823-834. ASME. https://doi.org/10.1115/ICONE10-22118
Download citation file: