0
Manufacturing & Processing
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Manufacturing Science and Engineering  |  research-article
2018
Kejia Zhuang, Jian Weng, Dahu Zhu and Han Ding
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4040087

Journal of Tribology  |  research-article
2018
Cunao Feng, Dekun Zhang, Kai Chen and yongbo guo
J. Tribol , (2018);  doi:10.1115/1.4040071

Journal of Micro and Nano-Manufacturing  |  research-article
2018
Soham S. Mujumdar, Davide Curreli and Shiv G. Kapoor
J. Micro Nano-Manuf 6, 031001 (2018) (6 pages);  doi:10.1115/1.4039508

Journal of Manufacturing Science and Engineering  |  research-article
2018
Matteo Strano, Quirico Semeraro, Lorenzo Iorio and Roberto Sofia
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4040025

Journal of Engineering and Science in Medical Diagnostics and Therapy  |  research-article
2018
Zhigang Zeng, Robert Brennan and Theodor Freiheit
ASME J of Medical Diagnostics , (2018);  doi:10.1115/1.4040055

Journal of Manufacturing Science and Engineering  |  Technical Brief
2018
Injoo Hwang, Zeyi Guan and Xiaochun Li
J. Manuf. Sci. Eng , (2018);  doi:10.1115/1.4040026

Journal of Engineering Materials and Technology  |  research-article
2018
Hossein Sepiani, Maria A. Polak and Alexander Penlidis
J. Eng. Mater. Technol , (2018);  doi:10.1115/1.4040003

Journal of Engineering Materials and Technology  |  research-article
2018
Pham Quang Trung, David Lee Butler and Idapalapati Sridhar
J. Eng. Mater. Technol , (2018);  doi:10.1115/1.4040004

Journal of Engineering Materials and Technology  |  research-article
2018
Tianshun Dong, Xiaodong Zheng, Guolu Li, Haidou Wang, Ming Liu, Xiukai Zhou and Yalong Li
J. Eng. Mater. Technol , (2018);  doi:10.1115/1.4040005

Journal of Engineering for Gas Turbines and Power  |  research-article
2018
Michael J. Walock, Vann Heng, Andy Nieto, Anindya Ghoshal, Muthuvel Murugan and Daniel Dreimeyer
J. Eng. Gas Turbines Power , (2018);  doi:10.1115/1.4040011

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
OPEN ACCESS Front Matter
Chao Li
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Front Matter (2018) (8 pages);  doi:10.1115/1.861677_fm

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Ali Asghar Heydari, Mohammad Mohseni, Mohammad Vahedi and Najmeddin Arab
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Simulation of Steel Sheets Cold Rolling in Normal Friction Condition (2018) (10 pages);  doi:10.1115/1.861677_ch25

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Li-Ming Sun, Xiao-Fen Han, Yan Wang and Dong-Fang Liu
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Study on Effect of Simulation Grinding Wheel Diameter Change on Cutting Edge Curves of Ball-nose End Mill (2018) (5 pages);  doi:10.1115/1.861677_ch26

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Wei Chen
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Application of “Stability and Dexterity” in Farm Machinery Product (2018) (6 pages);  doi:10.1115/1.861677_ch27

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Wei Wang
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Aircraft Winglet Assembly Tolerance Analysis and Scheme Comparison (2018) (7 pages);  doi:10.1115/1.861677_ch35

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Lei Bai
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Design of Mechanical Structure of an Extrusion-type 3D Printer (2018) (6 pages);  doi:10.1115/1.861677_ch38

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Accuracy-associated Models (2018) (14 pages);  doi:10.1115/1.861615_ch2

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Form-shaping Function: Mathematical Formulation (2018) (54 pages);  doi:10.1115/1.861615_ch3

Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy  |  Paper
2018
Vladimir T. Portman
Mechanics of Accuracy in Engineering Design of Machines and Robots Volume I: Nominal Functioning and Geometric Accuracy Accuracy of an Axis (2018) (34 pages);  doi:10.1115/1.861615_ch9

Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 2, Fifth Edition  |  Paper
2018
John P. Swezy, Jr. and Joel G. Feldstein
Companion Guide to the ASME Boiler and Pressure Vessel Codes, Volume 2, Fifth Edition Welding, Brazing and Fusing Qualifications (2018) (38 pages);  doi:10.1115/1.861318_ch25

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
GTINDIA2017, pp. V001T00A001- (2017) 1 pages
doi:10.1115/GTINDIA2017-NS1

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
GTINDIA2017, pp. V002T00A001- (2017) 1 pages
doi:10.1115/GTINDIA2017-NS2

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Christian U. Waldherr and Damian M. Vogt
GTINDIA2017, pp. V002T05A014- (2017) 12 pages
doi:10.1115/GTINDIA2017-4684

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Sharang Kirloskar, Gurmeet Singh and Avinash Kumar
GTINDIA2017, pp. V002T05A028- (2017) 8 pages
doi:10.1115/GTINDIA2017-4779

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Chetan Kumar Hirwani, Subrata Kumar Panda, Siba Sankar Mahapatra, Sanjib Kumar Mandal and Apurba Kumar De
GTINDIA2017, pp. V002T05A032- (2017) 7 pages
doi:10.1115/GTINDIA2017-4847

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Pravat Ranjan Pati and Alok Satapathy
GTINDIA2017, pp. V002T10A001- (2017) 8 pages
doi:10.1115/GTINDIA2017-4514

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Santhosh Kumar Rao Chandrasekara, Anigani Sudarshan Reddy, Dheepa Srinivasan and Durga Ananthanarayanan
GTINDIA2017, pp. V002T10A004- (2017) 10 pages
doi:10.1115/GTINDIA2017-4614

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Anshuman Kumar Sahu, Siba Sankar Mahapatra and Suman Chatterjee
GTINDIA2017, pp. V002T10A005- (2017) 16 pages
doi:10.1115/GTINDIA2017-4636

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Arackal Narayanan Jinoop, Christ Prakash Paul and Kushvinder Singh Bindra
GTINDIA2017, pp. V002T10A007- (2017) 8 pages
doi:10.1115/GTINDIA2017-4798

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Vaibhav N. Bhavsar, Jyoti Shankar Jha, Ghanshyamsinh Jhala, Alphonsa Joseph, Sushil Mishra and Asim Tewari
GTINDIA2017, pp. V002T10A008- (2017) 5 pages
doi:10.1115/GTINDIA2017-4855

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In