0
Tribology
Email Alert
Please Wait... Processing your request... Please Wait.

Journal of Tribology  |  research-article
2018
Szymon Bernat, Angelika Brink, Perez Melodía Lucas and Nuria Espallargas
J. Tribol , (2018);  doi:10.1115/1.4040078

Journal of Tribology  |  research-article
2018
Cunao Feng, Dekun Zhang, Kai Chen and yongbo guo
J. Tribol , (2018);  doi:10.1115/1.4040071

Journal of Fluids Engineering  |  research-article
2018
Wenjuan Gou, J.H. Wu, Hui Zhang and Jijian Lian
J. Fluids Eng , (2018);  doi:10.1115/1.4040066

Journal of Offshore Mechanics and Arctic Engineering  |  research-article
2018
Leilei Dong, Qi Zhang, Yi Huang, Gang Liu and Zhiyuan Li
J. Offshore Mech. Arct. Eng 140, 051701 (2018) (8 pages);  doi:10.1115/1.4039524

Journal of Micro and Nano-Manufacturing  |  research-article
2018
Soham S. Mujumdar, Davide Curreli and Shiv G. Kapoor
J. Micro Nano-Manuf 6, 031001 (2018) (6 pages);  doi:10.1115/1.4039508

Journal of Tribology  |  research-article
2018
Weitao Sun, Wenlong Zhou, Jianfa Liu, Xuesong Fu, G.Q., Chen and Shan Yao
J. Tribol , (2018);  doi:10.1115/1.4040053

Journal of Tribology  |  research-article
2018
Rafal Kozdrach and Jaroslaw Skowronski
J. Tribol , (2018);  doi:10.1115/1.4040054

Journal of Tribology  |  research-article
2018
Wei Wang, Huaiju Liu, Caichao Zhu, philippe Bocher, Heli Liu and Zhangdong Sun
J. Tribol , (2018);  doi:10.1115/1.4040052

Journal of Tribology  |  research-article
2018
Dallin Morris, Farshid Sadeghi, Youg-Ching Chen, Chinpei Wang and Ben Wang
J. Tribol , (2018);  doi:10.1115/1.4040051

Journal of Tribology  |  Discussion
2018
Adrian Rienäcker and Johann Graf
J. Tribol , (2018);  doi:10.1115/1.4040013

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Xiao-Yue Chen, Xiao-Yan Zhang, Peng-Zhan Chen and Ke Zhou
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Fault Diagnosis based on Rough Set and Dependent Feature Vector for Rolling Element Bearings (2018) (9 pages);  doi:10.1115/1.861677_ch12

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Ali Asghar Heydari, Mohammad Mohseni, Mohammad Vahedi and Najmeddin Arab
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Simulation of Steel Sheets Cold Rolling in Normal Friction Condition (2018) (10 pages);  doi:10.1115/1.861677_ch25

International Conference on Control Engineering and Mechanical Design (CEMD 2017)  |  Paper
2018
Qing-Long Ma
International Conference on Control Engineering and Mechanical Design (CEMD 2017) Analysis of Driving Torque of 20-High Sendzimir Mill (2018) (7 pages);  doi:10.1115/1.861677_ch34

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Bryan D. Miller, Denise J. Paraventi, Clint B. Geller and Thomas W. Webb
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments The Influence of Hydrogen on Corrosion Fatigue Crack Growth Behavior in Type 304/304L Stainless Steel in Elevated Temperature Deaerated Pressurized Water (2017) (11 pages);  doi:10.1115/1.861387_ch30

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
E. B. Melo, P. Behera, K. R. Sriraman, S. V. Brahimi and S. Yue
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Hydrogen Permeation and TDS Quantification Following Corrosion of Sacrificial Coatings (2017) (9 pages);  doi:10.1115/1.861387_ch61

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
G. Louis Powell, W. J. Siekhaus and N. E. Teslich
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Corrosion Experiments Using Spherical Uranium Powders (2017) (6 pages);  doi:10.1115/1.861387_ch63

International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments  |  Paper
2017
Kyle J. Alvine, Kriston P. Brooks, Edward R. Duranty, Nalini C. Menon, Alan M. Kruizenga, Chris San Marchi, Barton Smith and Amit Naskar
International Hydrogen Conference (IHC 2016): Materials Performance in Hydrogen Environments Hydrogen Compatibility of Polymers for Infrastructure Applications: Friction and Wear (2017) (9 pages);  doi:10.1115/1.861387_ch73

Ultrasonic Welding of Lithium-Ion Batteries  |  Paper
2017
OPEN ACCESS Front Matter
Ultrasonic Welding of Lithium-Ion Batteries Front Matter (2017) (12 pages);  doi:10.1115/1.861257_fm

Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants  |  Paper
2017
ASME Committee
Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants Scope (2017) (2 pages);  doi:10.1115/1.861264_ch2

Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants  |  Paper
2017
ASME Committee
Consensus on Pre-Commissioning Stages for Cogeneration and Combined Cycle Power Plants Initial Hydrostatic Test (Hydro) and High-Velocity Flush (HVF) (2017) (2 pages);  doi:10.1115/1.861264_ch9

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
GTINDIA2017, pp. V001T00A001- (2017) 1 pages
doi:10.1115/GTINDIA2017-NS1

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
Ravi J. Chotalia and Dilipkumar Bhanudasji Alone
GTINDIA2017, pp. V001T01A008- (2017) 11 pages
doi:10.1115/GTINDIA2017-4594

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
Dhairyasheel Deshmukh, M. Hamid Siddique and Abdus Samad
GTINDIA2017, pp. V001T01A017- (2017) 10 pages
doi:10.1115/GTINDIA2017-4848

Volume 1: Compressors, Fans and Pumps; Turbines; Heat Transfer; Combustion, Fuels and Emissions
2017
Naveen Sharma, Vaibhav Sharma and Andallib Tariq
GTINDIA2017, pp. V001T03A016- (2017) 8 pages
doi:10.1115/GTINDIA2017-4881

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
GTINDIA2017, pp. V002T00A001- (2017) 1 pages
doi:10.1115/GTINDIA2017-NS2

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Raghavendra R. Bejgam and Mathew P. James
GTINDIA2017, pp. V002T05A005- (2017) 6 pages
doi:10.1115/GTINDIA2017-4599

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Pravat Ranjan Pati and Alok Satapathy
GTINDIA2017, pp. V002T10A001- (2017) 8 pages
doi:10.1115/GTINDIA2017-4514

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Anshuman Kumar Sahu, Siba Sankar Mahapatra and Suman Chatterjee
GTINDIA2017, pp. V002T10A005- (2017) 16 pages
doi:10.1115/GTINDIA2017-4636

Volume 2: Structures and Dynamics; Renewable Energy (Solar, Wind); Inlets and Exhausts; Emerging Technologies (Hybrid Electric Propulsion, UAV, ...); GT Operation and Maintenance; Materials and Manufacturing (Including Coatings, Composites, CMCs, Additive Manufacturing); Analytics and Digital Solutions for Gas Turbines/Rotating Machinery
2017
Vaibhav N. Bhavsar, Jyoti Shankar Jha, Ghanshyamsinh Jhala, Alphonsa Joseph, Sushil Mishra and Asim Tewari
GTINDIA2017, pp. V002T10A008- (2017) 5 pages
doi:10.1115/GTINDIA2017-4855

Volume 1: Advances in Aerospace Technology
2017
IMECE2017, pp. V001T00A001- (2017) 1 pages
doi:10.1115/IMECE2017-NS1

Sorry! You do not have access to this content. For assistance or to subscribe, please contact us:

  • TELEPHONE: 1-800-843-2763 (Toll-free in the USA)
  • EMAIL: asmedigitalcollection@asme.org
Sign In